Wrong Ammo
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Wrong Ammo
I wonder if the case split was sudden and great enough that all the combustion energy was directly against the cylinder?
Michael
Re: Wrong Ammo
How long after the accident were the pictures taken?
Not an expert but have worked with metal most of my life.
The rust on the cylinder edges says to me that this was something that took place over a long period of time and the final blow( or shot) caused the failure.
just my $.02 worth.
beekeeper
Not an expert but have worked with metal most of my life.
The rust on the cylinder edges says to me that this was something that took place over a long period of time and the final blow( or shot) caused the failure.
just my $.02 worth.
beekeeper
- RBHarter
- Founding Member
- Posts: 2046
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Wrong Ammo
I did see a very similar photo that was blamed on a BP Colts with air space allowed. That would do it. It might also do it if there were already a bullet stuck in the forcing cone and another fired. Think squib then a +p+ 200 gr load pushing 400 grains. It might only take a day to get that rust down south or on the coast. lots of possibilities. I saw 1similar in a gun smith's place that had suffered from mixed powder, Red Dot and Unique, I guess 9.5 grains of Red dot with a 260 jhp will wreck 1 bad enough to ruin even the screws.
Just a Red neck,White boy, Blue blood American.....
-
- Posts: 44
- Joined: 18 Sep 2014 02:08
- My Press Choice: Progressive
- Location: People's Republic of Illinois
- Been thanked: 13 times
Re: Wrong Ammo
Think of this, the force is always directed against the cylinder. When a undersized case splits the pressure vents. Without a contained area(the cylinder chamber) to hold the pressure it won't build pressure like it normally would. The same for the bullet. The bullet will have absolutely no resistance going down the barrel. No opportunity to build pressure.Ranch Dog wrote:I wonder if the case split was sudden and great enough that all the combustion energy was directly against the cylinder?
The end result of shooting this 44 in a Ruger 45 colt would be much like tossing it in a fire, the case ruptures and the pressure dissipates. It certainly wouldn't blow up the gun.
- mr surveyor
- Founding Member
- Posts: 650
- Joined: 30 Jun 2013 09:30
- My Press Choice: Hand Press
- Location: NE Texas
- Has thanked: 386 times
- Been thanked: 231 times
Re: Wrong Ammo
ljnowel wrote:Think of this, the force is always directed against the cylinder. When a undersized case splits the pressure vents. Without a contained area(the cylinder chamber) to hold the pressure it won't build pressure like it normally would. The same for the bullet. The bullet will have absolutely no resistance going down the barrel. No opportunity to build pressure.Ranch Dog wrote:I wonder if the case split was sudden and great enough that all the combustion energy was directly against the cylinder?
The end result of shooting this 44 in a Ruger 45 colt would be much like tossing it in a fire, the case ruptures and the pressure dissipates. It certainly wouldn't blow up the gun.
that makes sense to me if the brass was grossly undersized for the chamber .... but if the case was undersized just enough to delay the pressure in the case while it was expanding to the chamber walls, and reach nearly full burn before the bullet cleared the case mouth .... ?
still scratching my somewhat ignorant head here
jd
--------------------------------------------------------------------------------------
There's just some things best left unsaid on the internetsuperhighway.
There's just some things best left unsaid on the internetsuperhighway.
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: Wrong Ammo
Probably just an old revolver with a weak spot due to use, he had it for years and shot it a lot.
Too sum it up:
It was a 45 long colt, and had a 44 mag case head smashed up against the back plate.
The ammo was a new box. (We all know that factory ammo is always perfect.... right?)
Somebody put a 44 mag in the box of 45 LC. Maybe an accident, maybe not.
It blew up the revolver. (By the way it still has a nice trigger on it.)
The point is: Use the right ammo.
Too sum it up:
It was a 45 long colt, and had a 44 mag case head smashed up against the back plate.
The ammo was a new box. (We all know that factory ammo is always perfect.... right?)
Somebody put a 44 mag in the box of 45 LC. Maybe an accident, maybe not.
It blew up the revolver. (By the way it still has a nice trigger on it.)
The point is: Use the right ammo.
- mr surveyor
- Founding Member
- Posts: 650
- Joined: 30 Jun 2013 09:30
- My Press Choice: Hand Press
- Location: NE Texas
- Has thanked: 386 times
- Been thanked: 231 times
Re: Wrong Ammo
Steve
Just so you know .... I don't think anyone is "arguing" as to what happened. I think we're all just wanting to understand "what" happened, and why (why the kaboom).
As for gun shops putting several different boxes of ammo in front of customers to look at .... I've seen it more than once.... stuff does tend to get mixed up when novices are looking at different "bullets", and the shop owner isn't paying very close attention.
jd .... still learning and breathing on the green side of the grass
Just so you know .... I don't think anyone is "arguing" as to what happened. I think we're all just wanting to understand "what" happened, and why (why the kaboom).
As for gun shops putting several different boxes of ammo in front of customers to look at .... I've seen it more than once.... stuff does tend to get mixed up when novices are looking at different "bullets", and the shop owner isn't paying very close attention.
jd .... still learning and breathing on the green side of the grass
--------------------------------------------------------------------------------------
There's just some things best left unsaid on the internetsuperhighway.
There's just some things best left unsaid on the internetsuperhighway.
-
- Posts: 44
- Joined: 18 Sep 2014 02:08
- My Press Choice: Progressive
- Location: People's Republic of Illinois
- Been thanked: 13 times
Re: Wrong Ammo
I think there may have been more at here. I have to question the integrity of the round in the chamber. It's quite possible that if the wrong round was in the box that this round could have been an improperly loaded round, or possibly a case of direct sabotage. Being familiar with how ammunition is made then packaged (via Olin) at no time would 44 mag ammo be anywhere near 45 colt ammo in the manufacturing and packaging process.Steve wrote:Probably just an old revolver with a weak spot due to use, he had it for years and shot it a lot.
Too sum it up:
It was a 45 long colt, and had a 44 mag case head smashed up against the back plate.
The ammo was a new box. (We all know that factory ammo is always perfect.... right?)
Somebody put a 44 mag in the box of 45 LC. Maybe an accident, maybe not.
It blew up the revolver. (By the way it still has a nice trigger on it.)
The point is: Use the right ammo.
I have to wonder if this wasn't an intentional sabotage by someone who was involved in manufacturing the ammo. Otherwise I would have to stand by what I said previously, a standard 44 mag would not do that.
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: Wrong Ammo
You know, it wouldn't take much of a secret agent man to
load up a nuclear power load of caliber such & such & slip
them into unsuspecting boxes of factory ammo?? & considering
some of the nut's of today & some of the things they will do
for giggles, I would not discount the possibility????
But I do have to agree, something don't sound right here,
on the pressure side of thing's???????
load up a nuclear power load of caliber such & such & slip
them into unsuspecting boxes of factory ammo?? & considering
some of the nut's of today & some of the things they will do
for giggles, I would not discount the possibility????
But I do have to agree, something don't sound right here,
on the pressure side of thing's???????
A day late & A dollar short? Story of my life
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Wrong Ammo
larryw wrote:You know, it wouldn't take much of a secret agent man to
load up a nuclear power load of caliber such & such & slip
them into unsuspecting boxes of factory ammo?? & considering
some of the nut's of today & some of the things they will do
for giggles, I would not discount the possibility????
But I do have to agree, something don't sound right here,
on the pressure side of thing's???????
That was done with great success over in Iraq.
Je suis Charlie