Got free Load All, need help with setup!
Posted: 23 Oct 2014 19:51
Used to reload as a teenager with a mec 700 back in the 70's. Got sold when off to college and didnt get back into trap until this past summer.
My cousin gave me a LEE loadall and will need assistance on what I need to get it up and running.
It is set up for 12 gauge which is what I need.
According to the list of bushings listed on the Lee website, I am missing the following: 7/8 oz, 128, 155.
I have a second 163 and have the 180, 189, and 198 bush that isnt even listed.
Looks like I have a backup wad guide and the sizing collar is included.
Looking at the base, I looks like this may be pretty old but for just whipping up trap loads, it should work.
There is no shell plate but looks like its molded in.
One part that does look like it is missing is the primer spring and guide.
I should be able to order them online I would think.
Here are a couple of pics of the upper and base with the bushing box contents.
Thanks for any suggestion and assistance.
Joe
My cousin gave me a LEE loadall and will need assistance on what I need to get it up and running.
It is set up for 12 gauge which is what I need.
According to the list of bushings listed on the Lee website, I am missing the following: 7/8 oz, 128, 155.
I have a second 163 and have the 180, 189, and 198 bush that isnt even listed.
Looks like I have a backup wad guide and the sizing collar is included.
Looking at the base, I looks like this may be pretty old but for just whipping up trap loads, it should work.
There is no shell plate but looks like its molded in.
One part that does look like it is missing is the primer spring and guide.
I should be able to order them online I would think.
Here are a couple of pics of the upper and base with the bushing box contents.
Thanks for any suggestion and assistance.
Joe