Page 2 of 2
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 01 Sep 2023 15:58
by lightload
Standard pressure reloads are kind to cases. Carbide sizer dies seem to work cases more than do older type steel dies. Roll crimps work brass more so than do taper crimps. A valid statement is the less that brass is worked the longer it will last.
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 12 Feb 2024 07:55
by drone
Thanks for all the responses, I have about 500 or so 38sp+ cases that I'm gradually emptying and putting into retirement as I've gotten hold of about 400 357 cases, about 250 of which are IMI which I think is the Israeli Metal Industries product which are the dogs danglies. As soon as I've run out of 38s I'll start filling these.
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 12 Feb 2024 08:13
by MoMan
Been reloading for quite a long time and have NEVER had to trim a straight wall handgun case! I prep (decap and tumble), then get after it, and never look back!
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 27 Feb 2024 05:40
by FlaNative
Im still loading 38 Special that says "Peters" on the case head...not "Rem-Peters", just Peters.
Heck, some of them the headstamp has disappeared all together.
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 27 Feb 2024 06:26
by GasGuzzler
I have some .32WCF brass from pre-smokeless powder times but I doubt it's been reloaded.
Re: 38 Special brass, how many reloads before it morphs into 357
Posted: 02 Mar 2024 09:39
by Royce
MoMan wrote: ↑12 Feb 2024 08:13
Been reloading for quite a long time and have NEVER had to trim a straight wall handgun case! I prep (decap and tumble), then get after it, and never look back!
I bought some range brass 45 Colt cases that turned out to be way too long. The extractor marks looked like they were fired in some sort of lever action rifle. Since trimming them to length they have worked fine.