Page 1 of 1
Hello from San Antone
Posted: 24 Nov 2021 07:44
by SF Mongo
Been reloading for a little over a year. Started with the Lee Challenger kit and have now reached the point of needing a multi station press. Haven't made up my mind on a progressive or turret yet. Leaning towards turret. If I could case and bullet feed 7.62x39 I think I would go to the turret.
Re: Hello from San Antone
Posted: 24 Nov 2021 12:11
by Ranch Dog
Howdy. I haven't loaded any lately, but I use a Load-Maser set up to load the 7.62x39. The Lee bullet feeder kit is for pistol bullets only. Placing the bullet on a case mouth doesn't slow the operation down.
It doesn't take long to fill the storage boxes up! An outfit, American Accurate, sells a rifle case collator that is the best. They can be found on eBay.
Progressive load is a bit of a strange thing. The setup, I'm talking about the brass prep, is everything. You don't dump a bunch of cases in a tube and get with it if you want quality, accurate ammo. Instead, you prep each case as if you were loading them one at a time.