Page 1 of 1
Ever seen this Lee Sizer???
Posted: 15 Feb 2021 19:34
by AlaskanGuy
take a peek at this!!
this is the first time I have ever seen one of these... this one is in 357 mag..
anybody ever use this or even seen one?
AG
Re: Ever seen this Lee Sizer???
Posted: 15 Feb 2021 19:40
by GasGuzzler
I have ... here. I would like to know what a "LUB PAN" and a "LUB CUTTER" is...that's what it says on the package.
The old Lee company is top of mind since I listed my 3" .410 and .45 Colt Loaders today. Lee Custom Engineering was before Lee Performance.
Re: Ever seen this Lee Sizer???
Posted: 16 Feb 2021 09:29
by Ranch Dog
Re: Ever seen this Lee Sizer???
Posted: 16 Feb 2021 09:34
by Ranch Dog
Lee sold the cutters and sizers separately as well. I have a bunch of them. I found these NOS items in a shop that was closing up. I bought them all.
Re: Ever seen this Lee Sizer???
Posted: 16 Feb 2021 09:38
by Rattler21
If I recall correctly the lube is melted in the pan, bullets put in molten lube and then lube is allowed to cool off/harden thus "lubing" the bullets, once lube re-hardens the cutter is used to remove said bullets from the lube, shave off excess lube and I presume ready to load. Never got into the casting/lube stuff myself.
Re: Ever seen this Lee Sizer???
Posted: 16 Feb 2021 09:40
by Ranch Dog
It was a mess and cured a lot of people from ever casting again.
Re: Ever seen this Lee Sizer???
Posted: 16 Feb 2021 10:46
by AlaskanGuy
when I first started casting a long time ago, I used to pan lube... i got my first Lyman sizer and never looked back...
wow Michael, no wonder you were in a dilemma about moving your shop... I got some old bridges that say lee that your Surely need.... he he
Re: Ever seen this Lee Sizer???
Posted: 17 Mar 2021 12:19
by mikld
I started with that kit. I started casting in the mid '80s and was on a budget. I found one of the 44 cal kits on ebay, used and IIRC I payed $5.00 + shipping for it. The pan had an unknown red lube that worked OK for my 44 Magnum loads. Worked fine and I used it for several hundred bullets before I got the Lee push through kit...
Re: Ever seen this Lee Sizer???
Posted: 14 Sep 2021 12:56
by Fresch
I have some in the bottom of A box someplace.
Re: Ever seen this Lee Sizer???
Posted: 26 Sep 2021 19:16
by reloader762
I have one of those Lee Lube and size kits when I first started casting for 357 Mag. back in the early 80s Still have the sizer, but no clue where the cutter and pan are at.