Lee Loader data sheets
- AlaskanGuy
- Founding Member & Supporter
- Posts: 260
- Joined: 13 Mar 2014 10:14
- My Press Choice: Turret
- Location: Remote Alaska
- Has thanked: 9 times
- Been thanked: 112 times
Lee Loader data sheets
Morning guys...
I have been going through stuff in my workshop and realize I have several lee loaders without the original data sheets ... i have been searching high and low for the data sheets. i see that leeloader.com has some unique ones, but not the ones I am looking for..
Does anybody have them for:
38 special
357 mag
223 (new production all red small case)
12g shotgun
44 mag.
All the rest of mine are complete...
Also looking for a lee loader for 32 win special if they even exist?
thanks guys,,
AlaskanGuy
I have been going through stuff in my workshop and realize I have several lee loaders without the original data sheets ... i have been searching high and low for the data sheets. i see that leeloader.com has some unique ones, but not the ones I am looking for..
Does anybody have them for:
38 special
357 mag
223 (new production all red small case)
12g shotgun
44 mag.
All the rest of mine are complete...
Also looking for a lee loader for 32 win special if they even exist?
thanks guys,,
AlaskanGuy
Any technology, not understood, can seem like magic....
-
- Posts: 79
- Joined: 05 Dec 2020 13:03
- My Press Choice: Lee Loader
- Location: Central VA
- Has thanked: 2 times
- Been thanked: 6 times
Re: Lee Loader data sheets
AG, I’ve got the data sheet in my 38 Special set... I’ll scan it and send it if you’ll PM me an e-mail address I’ll shoot a picture of it to you.
As for the elusive 32 Special set, I’ve never owned one of those but don’t give up hope... I’ve got a 32-40 set that came from Lee Custom about the time they became Mequon.
Froggie
As for the elusive 32 Special set, I’ve never owned one of those but don’t give up hope... I’ve got a 32-40 set that came from Lee Custom about the time they became Mequon.
Froggie
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: Lee Loader data sheets
I only have two Lee Loaders and they're both listed on eBay. One is a .410 3" and the other is a .45 Colt. The .410 is complete. The .45 Colt has a newish instruction sheet and no load data. Load data can be bought from Lee for about $2 plus nine thousand dollars in shipping. Both mine have black dippers meaning they have the older data that must be converted and vice versa.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- RBHarter
- Founding Member
- Posts: 2047
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Lee Loader data sheets
The 32 Win Special/32 Rem set does in fact exist . I had one for several years until I aquired a set of CH press mounted dies . I had a 20 ga set also and 357 . All 3 gone now .
Just a Red neck,White boy, Blue blood American.....
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Lee Loader data sheets
Yep, have a 32 Win Spl kit for my Marlin 336RC. Dies are cheaper than the kit.
Michael
-
- 250 Shots
- Posts: 255
- Joined: 03 Jan 2017 10:58
- My Press Choice: Turret
- Location: Utah
- Has thanked: 56 times
- Been thanked: 85 times
Re: Lee Loader data sheets
You need to specify which kit you have, old or new, meaning the old black or red dippers or the yellow ones. There is a difference.
I sometimes go onto eBay and look up Lee Loaders and check out the charge cards if they are legible and then copy the data. I have a running list if anyone is interested.
I have 38 special old kit, 357 in old and new, 223 in a new, 44 mag new. My 12 ga kit is a 3" magnum kit.
I sometimes go onto eBay and look up Lee Loaders and check out the charge cards if they are legible and then copy the data. I have a running list if anyone is interested.
I have 38 special old kit, 357 in old and new, 223 in a new, 44 mag new. My 12 ga kit is a 3" magnum kit.
- AlaskanGuy
- Founding Member & Supporter
- Posts: 260
- Joined: 13 Mar 2014 10:14
- My Press Choice: Turret
- Location: Remote Alaska
- Has thanked: 9 times
- Been thanked: 112 times
Re: Lee Loader data sheets
I will check that out and PM ya...
Any technology, not understood, can seem like magic....
-
- Posts: 79
- Joined: 05 Dec 2020 13:03
- My Press Choice: Lee Loader
- Location: Central VA
- Has thanked: 2 times
- Been thanked: 6 times
Re: Lee Loader data sheets
I finally figured out my 38 Spl Lee Loader is in storage. I’ll try and get over there tomorrow, weather permitting.
Froggie
Froggie
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: Lee Loader data sheets
Evening AG, sorry I'm late to the party. I have the load sheet & instruction sheet in my
1974 .357mag kit. As soon as I find them ill attach them & send to you..
Take care & be safe...
1974 .357mag kit. As soon as I find them ill attach them & send to you..
Take care & be safe...
A day late & A dollar short? Story of my life