3d Printed 223 Bullet Feed Die
-
- Posts: 14
- Joined: 04 Sep 2020 13:00
- My Press Choice: Progressive
- Location: WI
- Has thanked: 1 time
- Been thanked: 3 times
3d Printed 223 Bullet Feed Die
I 3D printed a bullet feed Die for 223. I need to get the springs and supply tubes but seems to work. Instead of 4mm ball bearings I am using BBs also. This was designed by someone on Thingiverse.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: 3d Printed 223 Bullet Feed Die
Interesting. How long does it take to print something like this and how much material does it consume.
Michael
-
- Posts: 14
- Joined: 04 Sep 2020 13:00
- My Press Choice: Progressive
- Location: WI
- Has thanked: 1 time
- Been thanked: 3 times
Re: 3d Printed 223 Bullet Feed Die
Takes about 4 hours to print. small bit of sanding to smooth so it slides easily into each other. Then I opened. the detents a tiny bit to accept a BB instead of a 4mm bearing. All in all so far 4 hours print time .5 hours fine tuning.Ranch Dog wrote:Interesting. How long does it take to print something like this and how much material does it consume.
I am waiting on my springs to get here and I still need make some type of bullet supply tubes.
The files can be found here
3D Printed 223 Bullet feeder