My Rock Island 1911
Posted: 06 Mar 2020 19:03
Pretty long post here Gents so bear with me as I am a yakker for sure....
I'm pretty sure I mentioned purchasing a RIA 45 Auto (acp ) about a month or so ago. Got around 700 rounds through it,using my hand loads at mostly near full power loads using 200gr. RMR plated bullets and 185gr. and 230gr. Hornady FTX bullets. Just ordered 300 more of the Hornady 230's and another 100 of the 185s. I also ordered 300 pieces of Starline 45 Super brass. Guess you all can see where this is heading, huh.
This che-- err, inexpensive pistol is getting to be not so "inexpensive" it would seem. This gun comes "stock" with a 20lb main spring and an 18 pound recoil spring. And from what I've read from others (spring salesmen) that after around 500 rounds the "stock" springs pretty much should be replaced if shooting full power loads. I was going to anyway. So, what I've done SO FAR to set up for 45 super (I've done lot's of reading on this) is a flat bottom firing pin stop with xtra power firing pin spring. Spring changes are 25lb main (hammer) spring (also have a 23lb) and a Sprinco recoil system. The Sprinco is a dual spring system, a shorter captured spring that is I believe 35lb (maybe more on the one I bought) that is held in place on the guide rod (sorta, you have to look at one) but you can change the "regular" recoil spring to whatever rate you want. It's made in the USA, has a lifetime guarantee against breakage and is a work of art to see. It ain't cheap at a bit over 100 bucks for the Corbon unit (that kind of says it all) I purchased and it comes with three different weight recoil springs, 16lb, 18lb, and 20lb. I've been using it a bit and whether or not it reduces recoil or not I'm not sure, I have no way to measure that other than how it feels when you shoot with it. It seems to me to shoot "softer" but the real reason I bought it wasn't for recoil it was to help eliminate as much frame, slide battering as I could. I also purchased some Wolff springs from 18 up to 23lb and they each come with a corresponding firing pin spring for (?). Right now (my super brass hasn't arrived yet) I'm just shooting some "stiff" (read +P) loads of Silhouette powder and 230gr. xtp bullets using just a 16lb recoil spring (along with the other changes mentioned) everything functions well (tried the 18lb recoil spring first and gun would not lock back on last round so dropped to the 16) brass ejects about 8 feet with no FTF or FTE. Information from Sprinco says that when using their system you can generally drop back a couple pounds from the recoil spring rate you are currently using for your loads, and that's exactly where I'm at right now. When I get to Super, "most" Super shooters are using 24lb and up to 28lb recoil springs but I'm thinking that 23lb Wolff spring will be just the ticket. We'll see. I've read that you should go with as heavy a spring until the gun won't lock back on last round with the loads you're shooting then drop a couple lbs. (general idea) Seems to have been about right for me. Oh, almost forgot, put some really good looking (to me) thin grip stocks on the gun also. ...........more to follow. I should add my Pard Larryw has been a big help to me with all this. Hopefully you all won't be callin' me Lefty after I start this 45 Super stuff....
I'm pretty sure I mentioned purchasing a RIA 45 Auto (acp ) about a month or so ago. Got around 700 rounds through it,using my hand loads at mostly near full power loads using 200gr. RMR plated bullets and 185gr. and 230gr. Hornady FTX bullets. Just ordered 300 more of the Hornady 230's and another 100 of the 185s. I also ordered 300 pieces of Starline 45 Super brass. Guess you all can see where this is heading, huh.
This che-- err, inexpensive pistol is getting to be not so "inexpensive" it would seem. This gun comes "stock" with a 20lb main spring and an 18 pound recoil spring. And from what I've read from others (spring salesmen) that after around 500 rounds the "stock" springs pretty much should be replaced if shooting full power loads. I was going to anyway. So, what I've done SO FAR to set up for 45 super (I've done lot's of reading on this) is a flat bottom firing pin stop with xtra power firing pin spring. Spring changes are 25lb main (hammer) spring (also have a 23lb) and a Sprinco recoil system. The Sprinco is a dual spring system, a shorter captured spring that is I believe 35lb (maybe more on the one I bought) that is held in place on the guide rod (sorta, you have to look at one) but you can change the "regular" recoil spring to whatever rate you want. It's made in the USA, has a lifetime guarantee against breakage and is a work of art to see. It ain't cheap at a bit over 100 bucks for the Corbon unit (that kind of says it all) I purchased and it comes with three different weight recoil springs, 16lb, 18lb, and 20lb. I've been using it a bit and whether or not it reduces recoil or not I'm not sure, I have no way to measure that other than how it feels when you shoot with it. It seems to me to shoot "softer" but the real reason I bought it wasn't for recoil it was to help eliminate as much frame, slide battering as I could. I also purchased some Wolff springs from 18 up to 23lb and they each come with a corresponding firing pin spring for (?). Right now (my super brass hasn't arrived yet) I'm just shooting some "stiff" (read +P) loads of Silhouette powder and 230gr. xtp bullets using just a 16lb recoil spring (along with the other changes mentioned) everything functions well (tried the 18lb recoil spring first and gun would not lock back on last round so dropped to the 16) brass ejects about 8 feet with no FTF or FTE. Information from Sprinco says that when using their system you can generally drop back a couple pounds from the recoil spring rate you are currently using for your loads, and that's exactly where I'm at right now. When I get to Super, "most" Super shooters are using 24lb and up to 28lb recoil springs but I'm thinking that 23lb Wolff spring will be just the ticket. We'll see. I've read that you should go with as heavy a spring until the gun won't lock back on last round with the loads you're shooting then drop a couple lbs. (general idea) Seems to have been about right for me. Oh, almost forgot, put some really good looking (to me) thin grip stocks on the gun also. ...........more to follow. I should add my Pard Larryw has been a big help to me with all this. Hopefully you all won't be callin' me Lefty after I start this 45 Super stuff....