The Cost of Casting - Lead
-
- Supporter
- Posts: 1003
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 38 times
- Been thanked: 274 times
The Cost of Casting - Lead
I guess I'm going to probably kill this thread with this. I got to looking at how much casting lead I have left and it comes to about 200lbs give or take a few. (thought I had triple that) I do try to "recycle" what I shoot by shooting through heavy stall mats and into wood backstops but I suppose there could be as much as a 50% loss (?) never really investigated that just pick up the recovered bullets. What I have been casting for mostly over the years is 45 colt, 44mag, and 357mag. Used to do 45-70 but sold all those rifles off. These days I shoot more 9mm and soon will add 45acp and this will be the majority of what I'll be shooting. Why I was interested in the PC.
Where I'm going with this is, "cheap", free lead is unobtainable in my area any more, at least in any quantity so if I continue down the cast hiway for the 9mm and 45acp the alloy I have won't last long and I will eventually have to start buying alloy to cast with. About the least expensive I have found runs 2.50 and up per pound but free shipping. A bit of quick math tells me that I can purchase plated bullets shipped for about 10% more than raw alloy without the time and equipment for casting and PCing. Although I do have all the casting stuff needed and will continue to cast for the three previously mentioned as long as my stash lasts but will just buy and shoot plated for the other two as I expect to shoot a lot more of the 9 and 45acp. I do not particularly like making this decision but today's policies have kind of dictated that for me.
Where I'm going with this is, "cheap", free lead is unobtainable in my area any more, at least in any quantity so if I continue down the cast hiway for the 9mm and 45acp the alloy I have won't last long and I will eventually have to start buying alloy to cast with. About the least expensive I have found runs 2.50 and up per pound but free shipping. A bit of quick math tells me that I can purchase plated bullets shipped for about 10% more than raw alloy without the time and equipment for casting and PCing. Although I do have all the casting stuff needed and will continue to cast for the three previously mentioned as long as my stash lasts but will just buy and shoot plated for the other two as I expect to shoot a lot more of the 9 and 45acp. I do not particularly like making this decision but today's policies have kind of dictated that for me.
- farmerjim
- Supporter
- Posts: 315
- Joined: 29 Jan 2015 14:27
- My Press Choice: Turret
- Location: Saint Francisville LA
- Has thanked: 20 times
- Been thanked: 114 times
Re: The Cost of Casting - Lead
Horseman. Go over to Cast Boolits, Vendor sponsers, TheCaptain. She has 50 lbs of range lead to your door for $ 66.85. I have bought over 500 lbs from her.
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: The Cost of Casting - Lead
Yeah, $2.50 per pound shipped is super high. I have access to free weights but when I see it at $1.00 shipped I buy some...and I'm not consuming any right now.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: The Cost of Casting - Lead
I like the subject Horseman, so I split it out into a standalone topic. I believe the cost of casting is very much a reality for anyone anymore as to whether they should get into it or not. You throw in the fact that there are now ranges that don't allow the bullets, and I think the writing is on the wall.
I'm blessed with a healthy amount of lead, and my shooting seems to continue to slow down, plus I've switched back to jacketed bullets in all but one of my bolt action rifles. I've shipped some of my lead out, but what a hassle it is to reinforce a box. I wish you were closer.
I'm blessed with a healthy amount of lead, and my shooting seems to continue to slow down, plus I've switched back to jacketed bullets in all but one of my bolt action rifles. I've shipped some of my lead out, but what a hassle it is to reinforce a box. I wish you were closer.
Michael
-
- Supporter
- Posts: 1003
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 38 times
- Been thanked: 274 times
Re: The Cost of Casting - Lead
I've been a member of Cast Boolits for many years, learned a lot there and still continue to do so. Thanks for the reminder of "The Captain" farmerJim, I have seen the advertisement and she gets great "reviews". I did buy some WW ingots there (CB) several years back at a buck a pound shipped just to try it. No problems at all. The price she (The Captain) sells the range lead for is more than decent and the "approx" bhn of 12 or so is about perfect for handgun, at least in my opinion. May give her a shout-out and increase what I have on hand, but I think I'll still go with my original decision. Of those (plated) I can recover I can melt those down also so not a total loss there.
Thanks for moving the thread RD, casting costs are a real issue anymore and new ideas, methods and equipment are good to discuss along with places to acquire suitable alloy. Thanks again for the reminder Jim.
As far as getting out of the "pneumonia flats" that I call home in the quickly becoming the next California state of Washington, someone please help convince my Missus that moving South is a good idea. If you're listening Larry I'm thinking the Prescott area would be about perfect for me.
Thanks for moving the thread RD, casting costs are a real issue anymore and new ideas, methods and equipment are good to discuss along with places to acquire suitable alloy. Thanks again for the reminder Jim.
As far as getting out of the "pneumonia flats" that I call home in the quickly becoming the next California state of Washington, someone please help convince my Missus that moving South is a good idea. If you're listening Larry I'm thinking the Prescott area would be about perfect for me.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: The Cost of Casting - Lead
I thought Larry was moving to my locationhorseman wrote:If you're listening Larry I'm thinking the Prescott area would be about perfect for me.
Michael
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: The Cost of Casting - Lead
Well, I asked you to adopt us but you wouldn'tRanch Dog wrote: I thought Larry was moving to my location
A day late & A dollar short? Story of my life
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: The Cost of Casting - Lead
Yeah, not going to adopt anything else! You are welcome to move here. Can you see the distinction, Larry?larryw wrote:Well, I asked you to adopt us but you wouldn'tRanch Dog wrote: I thought Larry was moving to my location
Michael
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: The Cost of Casting - Lead
Yeah, not going to adopt anything else! You are welcome to move here. Can you see the distinction, Larry?larryw wrote:Well, I asked you to adopt us but you wouldn'tRanch Dog wrote: I thought Larry was moving to my location
Michael
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: The Cost of Casting - Lead
Horseman, Prescott is a great area, built up enough to be convenient, but not yet
enough to be big city dump. Nice summers, most times, nice winters.
Check out this web site, just plug in Prescott AZ.
http://www.zillow.com
enough to be big city dump. Nice summers, most times, nice winters.
Check out this web site, just plug in Prescott AZ.
http://www.zillow.com
A day late & A dollar short? Story of my life