Lee Loader

NOE, TL .311-166-RF
Anyone Casting this Bullet?

I have the 165 RD and the XCB but not that one .
What do you need to know about it ? I have a half dozen or more NOEs .

I like the Look of that Bullet and want to try It in My 30-30 Contender Barrels....
Would like to Buy 20 or so from Someone to see if They will chamber in My Guns,before I buy the Mold.

Don't have that one . I do have the RNFP 311-165 RD and it's very good in the old 325 30-30 and a 110 in 308 .

yep, those sound good

please send samples (500 or so would be good) to

mr surveyor
General Delivery
Stumpwater, Texas

I'll check them out


jd

I have a bunch of bullets cast as soon as I get stuff unpacked I'd trade you some of little ingots for your big ones .

I use the RD custom Lee TLC311-165-RF. (hand written notes were from the mold's original owner).

Sure is a Sexy lookin Bullet!

I sure have put a lot of those bullets downrange, but that is not the same bullet as the NOE TL311-165-RF. The bullet GG pictured is what I designated as the TLC311-165-RF and later changed it to the TLC311-170-RF to better reflect the weight. It was designed for the generous throat of Marlin 336s chambered in 30-30 Win.

It was not a good bullet for the Winchester M94, as they tend to keep chambers on spec, so I designed the TLC311-165-RF. Here is a comparison of the two, notice the bore rider nose of the 165.
The TL and TLC in the designation are simply whether there is a gas check shank or not. What are you going to use it for?

Was lookin at the NOE 311-166-RF for My 30-30win Contender Barrels...