Lee Custom Overrun Molds
Posted: 11 Nov 2018 13:04
In closeouts, Lee has a bunch of designs "coming soon". I notice that some of are my design; the TLC460-350-RF, TLC432-265-RF, and TLC359-190-RF. Given the price of the molds, I wonder if they are returns? I don't have any of my records anymore, but I do know that I sent a couple of orders back because of dimension cuts. Hmmm, the price is going to be right.
Two sample runs ready to go test once the cold wind lets up a bit; the difference in them being the hollow base filler. One set is hot glue filled and the other, Plastic Wood. The hulls were loaded with the Load-All II, I used the press set the 12S3 wad, nitro card, and slug. The X12X gas seal in the priming chamber is still making an awesome and effective stop for folding the star crimp.
https://leeprecision.com/custom-overrun ... -mold.html
Two sample runs ready to go test once the cold wind lets up a bit; the difference in them being the hollow base filler. One set is hot glue filled and the other, Plastic Wood. The hulls were loaded with the Load-All II, I used the press set the 12S3 wad, nitro card, and slug. The X12X gas seal in the priming chamber is still making an awesome and effective stop for folding the star crimp.
https://leeprecision.com/custom-overrun ... -mold.html