Accurate 43-470S Slug Mold
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Accurate 43-470S Slug Mold
I went off the deep end and bought the Accurate 43-470S slug mold.
This is a full-bore design that doesn't require a sabot (column wad). Wax Felt over powder wads are used to create the length of stack needed and a roll crimp is applied to contain the slug within the hull.
I feel there are too many obstacles with the Lee slug; it has been available for a long time with no one that I can find recording factory slug MOA performance at 100-yards.
This is a full-bore design that doesn't require a sabot (column wad). Wax Felt over powder wads are used to create the length of stack needed and a roll crimp is applied to contain the slug within the hull.
I feel there are too many obstacles with the Lee slug; it has been available for a long time with no one that I can find recording factory slug MOA performance at 100-yards.
Michael
-
- Founding Member & Supporter
- Posts: 1123
- Joined: 20 Dec 2013 11:09
- My Press Choice: Single Stage
- Location: Arizona
- Location: Arizona
- Has thanked: 688 times
- Been thanked: 327 times
Re: Accurate 43-470S Slug Mold
Yea, Buddy Good decision me thinks !
A day late & A dollar short? Story of my life
-
- Supporter
- Posts: 1002
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 38 times
- Been thanked: 274 times
Re: Accurate 43-470S Slug Mold
Interesting.....with a big azz lube groove. So this is fired like a "regular" bullet. That would (seem) to be a more logical direction to go, but I know not of shotgun slugs so...what kind of lube to use? Keep us informed as to the progress with this one.
On another note, I was watching some videos on U-tube about catching complete sounders ( and the reasons why) using a large fence trap (don't recall the name) with feeder and camera's and remote gates that drop simultaneously. A lot of info on hunting and capturing feral pigs in general. Very good watch and informative. I'm glad we don't have those things up here.
On another note, I was watching some videos on U-tube about catching complete sounders ( and the reasons why) using a large fence trap (don't recall the name) with feeder and camera's and remote gates that drop simultaneously. A lot of info on hunting and capturing feral pigs in general. Very good watch and informative. I'm glad we don't have those things up here.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Accurate 43-470S Slug Mold
Alas, the new mold generates a lot of questions without answers. The same thing I've run into, I find a few topics but posters don't document their work completely, nor do they give the results from that work.horseman wrote:Interesting.....with a big azz lube groove. So this is fired like a "regular" bullet. That would (seem) to be a more logical direction to go, but I know not of shotgun slugs so...what kind of lube to use? Keep us informed as to the progress with this one.
My ideas are to first use Rooster Jacket lube coating and if that doesn't work, pan lube with something simple like 50/50 beeswax. The RJ will prevent it from looking like you just shot a muzzleloader. If I have to pan lube, I will cut the brass off a new hull and use the plastic tube for a lube cutter. I've been pondering how to accomplish the cutting and just came up with that while typing
Hogs are a funny thing. Sportsman that don't have them where they hunt wish they did. Once you have them, you wish you didn't. Once you kill them all, you wish there a few would show up so that you had targets, once they arrive.... Its endless.horseman wrote:On another note, I was watching some videos on U-tube about catching complete sounders ( and the reasons why) using a large fence trap (don't recall the name) with feeder and camera's and remote gates that drop simultaneously. A lot of info on hunting and capturing feral pigs in general. Very good watch and informative. I'm glad we don't have those things up here.
Michael
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Accurate 43-470S Slug Mold
The Accurate mold arrived yesterday!
That's a big bullet. I might go ahead and pan lube it with the WLL 2500+ that I'm using with my rifles and then coat it with Rooster Jacket to provide a seal coat. I don't want the lube seeping in hot weather. I probably will try it with both a roll and star crimp.
That's a big bullet. I might go ahead and pan lube it with the WLL 2500+ that I'm using with my rifles and then coat it with Rooster Jacket to provide a seal coat. I don't want the lube seeping in hot weather. I probably will try it with both a roll and star crimp.
Michael
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Accurate 43-470S Slug Mold
I've learned to use a foam cell life preserver when shooting heavy recoil firearms.
I do limit myself to 12 shots with the slug gun as my neck hurt that evening if I shoot more.
I do limit myself to 12 shots with the slug gun as my neck hurt that evening if I shoot more.
Michael
- Macd
- Supporter
- Posts: 1009
- Joined: 16 Oct 2017 16:12
- My Press Choice: Single Stage
- Location: Far East
- Has thanked: 362 times
- Been thanked: 403 times
Re: Accurate 43-470S Slug Mold
Gotta get me one of those. I did a recoil calculation on the slug using 1500 FPS, 8 lb gun and 25 grains of powder. It gets close to BMG 50 range.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Accurate 43-470S Slug Mold
Jacket or slug?Macd wrote:Gotta get me one of those. I did a recoil calculation on the slug using 1500 FPS, 8 lb gun and 25 grains of powder. It gets close to BMG 50 range.
The life preserver is a lifesaver and not just with a slug gun. I use it now with a lot of rifles rather than the Lead Sled.
Michael