Ez-X-Expanders
Posted: 11 Mar 2017 21:54
[mod="Ranch Dog"]Posts within this topic were copied from another topic so that the information about the Ez-X-Expanders could be kept in a stand alone topic. Please feel free to participate![/mod]
I've been through that and I think flaring the case mouth of a bottle-neck cartridge creates more issues than it solves:HankRearden wrote:I really think a custom powder through flare die would be best if possible. Would great on the 4 hole turret press as well.
- The flare induces run-out as the bullet is seated.
- Slight variances in bullet vs. neck concentricity will buckle the case neck slightly as the bullet seating proceeds.
- Uniformly removing the flare as or after the bullet is seated is almost impossible to achieve. This results in case necks that are non-concentric or outside of the cartridge specs.