This was in an email from Titan Reloading.INSIGHT OF THE MONTH:
Auto Bench Prime Jamming Issue
If you do not lift the lever firmly enough, you may get a primer fed against the flash gate and a second primer in the elevator. To release trapped primer, use a paper clip to slide the primer back into the elevator. To prevent this from happening, firmly lift against the rubber up stop, or remove the rubber up stop o-ring with a pocket knife.
When installing a primer be sure to raise the lever back up to the top stop. If you simply let go of the lever at the bottom of the stroke the spring can return the lever with enough force to release another unwanted primer.
Auto Bench Prime Jamming Issue
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Auto Bench Prime Jamming Issue
Je suis Charlie
Re: Auto Bench Prime Jamming Issue
Lee needs to do the right thing and recall this product. I have tried it with the oring and with out still get primer jamming and without the oring the shell holder is lose and will not stay centered. Miss handling primers is dangerous.
-
- Founding Member & Supporter
- Posts: 674
- Joined: 30 Jun 2013 09:30
- My Press Choice: Turret
- Location: S. Oregun
- Has thanked: 203 times
- Been thanked: 371 times
Re: Auto Bench Prime Jamming Issue
All I can say is I'm approaching 800 cases primed with my Lee Bench Prime and when I operate it as the instructions indicate, I have no problems. I have not removed anything. Having read all the negative reports I can only deduce that the user is 90% at fault, IMHO. Perhaps me being a lifelong machinist/mechanic I can use hand tools correctly and as designed. The last 400 cases I have primed (small pistol, large pistol, large rifle), I have just dumped a sleeve of primers in the tray, inserted the tray, and primed 100 cases, non-stop. No jamming issues, no need for a recall...
- GasGuzzler
- Moderator & Supporter
- Posts: 2045
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: Auto Bench Prime Jamming Issue
Glad I have no use for this. That means no need to test. I'm an engineer schooled auto tech so I could use it I bet but I have no problem with my green hand primer or the weirdo on-press unit on my LCT.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Auto Bench Prime Jamming Issue
GasGuzzler wrote:Glad I have no use for this. That means no need to test. I'm an engineer schooled auto tech so I could use it I bet but I have no problem with my green hand primer or the weirdo on-press unit on my LCT.
I'm with you GasGuzzler as I love the Lee safety Prime that came with the Classic Turret but have a gizmo that I can use it on my single stage too so would go that way instead of buying a new mouse trap.
Je suis Charlie