Which powder for 9mm?

Carbide and Steel die sets plus the Carbide, Bottle Neck Pistol Cartridge, and Factory Crimp Dies. Also the Bulge Buster Kit.
User avatar
Poppop
250 Shots
250 Shots
Posts: 262
Joined: 02 Mar 2014 16:15
My Press Choice: Turret
Location: Easton, PA
Has thanked: 82 times
Been thanked: 53 times

Re: Which powder for 9mm?

Post by Poppop »

I use Bullseye for 9mm & .38 spec. Once in a while I'll use HP-38 for 9mm
If all else fails--look for the obvious
MAGA
rdover
Posts: 13
Joined: 14 Feb 2017 15:47
My Press Choice: Turret
Location: Tennessee
Been thanked: 7 times

Re: Which powder for 9mm?

Post by rdover »

I use Shooter's World Clean Shot. I think I'm the only one, because I never see anyone else mention it. It's either also known as Lovex or is the same thing. The reloading chart is from Lovex.
It meters great in the Auto Drum! When I first got the drum I checked every round, then went to every 5th, then 10th, then 25th. I now check every 50th. I use 4.0 grains for 9mm 124g RN and also for .40 165 RNFP. I've never seen it more than .1 off!
It is available at http://www.northgeorgiareloading.com (don't know shipping cost, because I buy in person).
User avatar
slayer61
Posts: 5
Joined: 03 Jan 2017 13:31
My Press Choice: Turret
Location: NORCAL
Has thanked: 2 times
Been thanked: 2 times

Re: Which powder for 9mm?

Post by slayer61 »

Titegroup, HP38, HS6, Autocomp, CFE Pistol, BE86, AA#7 and Longshot (I think that's all :oops: ) all in my storage locker and used in 9mm. HS6 is my "Go-To" choice. +guns
Paul
Post Reply

Return to “Handgun”