Lee will take care of you, they have good customer service.
Replaced the clutch on my Six /Pack Pro, didn't help
-
horseman
- Supporter
- Posts: 999
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 37 times
- Been thanked: 274 times
Re: Replaced the clutch on my Six /Pack Pro, didn't help
-
Royce
- Posts: 111
- Joined: 12 Apr 2020 11:35
- My Press Choice: Turret
- Location: Tulsa OK
- Has thanked: 14 times
- Been thanked: 23 times
Re: Replaced the clutch on my Six /Pack Pro, didn't help
I did not hear from them today. Hopefully I will tomorrow. Still working on this problem.
2 X Lee Classic Turret Presses, 3 X Lee 1000 Presses, 1 X Lee Reloader Press, 1X Lee Six Pack Pro, 1X Ultimate Turret
-
Royce
- Posts: 111
- Joined: 12 Apr 2020 11:35
- My Press Choice: Turret
- Location: Tulsa OK
- Has thanked: 14 times
- Been thanked: 23 times
Re: Replaced the clutch on my Six /Pack Pro, didn't help
Friday afternoon the CS rep at Lee suggested I remove the shell plate holder and inspect for stuff underneath. I did that and it looks clean under there. I submitted a video of the problem Saturday but no word yet.
2 X Lee Classic Turret Presses, 3 X Lee 1000 Presses, 1 X Lee Reloader Press, 1X Lee Six Pack Pro, 1X Ultimate Turret
-
Royce
- Posts: 111
- Joined: 12 Apr 2020 11:35
- My Press Choice: Turret
- Location: Tulsa OK
- Has thanked: 14 times
- Been thanked: 23 times
Re: Replaced the clutch on my Six /Pack Pro, didn't help
I guess he is off Mondays. This morning he watched my video and suggested that I remove the shellplate and inspect the two countersunk screws underneath to see if they were loose and rubbing. It turns out they were! I tightened the two screws and reassembled everything. It works perfectly now!!!!
You do not have the required permissions to view the files attached to this post.
2 X Lee Classic Turret Presses, 3 X Lee 1000 Presses, 1 X Lee Reloader Press, 1X Lee Six Pack Pro, 1X Ultimate Turret
-
Bill Moore
- Posts: 59
- Joined: 18 Nov 2023 15:11
- My Press Choice: Progressive
- Location: SW New Mexico
- Has thanked: 24 times
- Been thanked: 4 times
-
BrianT
- Supporter
- Posts: 78
- Joined: 19 Feb 2020 01:47
- My Press Choice: Progressive
- Location: McMillan, MI
- Has thanked: 19 times
- Been thanked: 10 times
Re: Replaced the clutch on my Six /Pack Pro, didn't help
That's great! I watched a video online from what appears to be a Lee Distributor, where he loosens those and turns the carrier if the primer tray isn't getting shook enough.