Primer Spring for Six Pack Pro 6000
-
- Posts: 5
- Joined: 23 Jan 2023 11:56
- My Press Choice: Turret
- Location: Eatonville, WA
- Has thanked: 1 time
Primer Spring for Six Pack Pro 6000
Patience isn't one of my strong suits so while I was out running some errands I stopped off at the local ACE Hardware store to see if they might have some springs that would work. They have an awesome hardware and fasteners isle. I was expecting to find a bin/drawer somewhere with springs in it. Well, I didn't find that, but as I'm walking the isle I look up and see these "plate hangers". And one size was using what looked like was the identical size spring to the primer spring on the press. It came with 2 springs.
I picked it up for $5.99 and got it home. I had to use my needle nose pliers to bend the ends to work, but once installed, it worked like a charm. So if you do need a spring and have an ACE Hardware close by, look for this plate hanger kit. Item # is 10204.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: 01 Sep 2023 12:25
- My Press Choice: Progressive
- Location: Nepean ON
- Has thanked: 1 time
Re: Primer Spring for Six Pack Pro 6000
It is a very unusual design. Wish I had come up with it. A spring being used to push and pull. I have a 6000 and just getting used to it.