I'm All In ~ App Press Deluxe
-
- Posts: 10
- Joined: 24 Jun 2016 20:41
- My Press Choice: Turret
- Location: TN
- Has thanked: 2 times
- Been thanked: 7 times
Re: I'm All In ~ App Press Deluxe
I just got the Deluxe Kit from Midsouth for $75.49. Ordered Thursday and received it today. Really looking forward to speeding up decapping/resizing operations.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: I'm All In ~ App Press Deluxe
I will look forward to hearing how the case sizing goes. I'm not doing that.
Michael
-
- Posts: 32
- Joined: 10 Nov 2019 16:25
- My Press Choice: Single Stage
- Location: MI
- Has thanked: 12 times
- Been thanked: 9 times
Re: I'm All In ~ App Press Deluxe
I did get mine last Friday. I haven't had a chance to set it up, but did look it over and found my #4 Xpress shell holder is bad. It looks like the cutter may have broken during the machining process and the holder wasn't cut right. It wont fit into the machine. The groove is all wonky. I will have to call Lee, but want to wait until I actually get it set up to make sure everything else is OK.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: I'm All In ~ App Press Deluxe
Can you get a picture of that?Tonerboy1 wrote:I did get mine last Friday. I haven't had a chance to set it up, but did look it over and found my #4 Xpress shell holder is bad. It looks like the cutter may have broken during the machining process and the holder wasn't cut right. It wont fit into the machine. The groove is all wonky. I will have to call Lee, but want to wait until I actually get it set up to make sure everything else is OK.
Michael
-
- Supporter
- Posts: 1006
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 38 times
- Been thanked: 274 times
Re: I'm All In ~ App Press Deluxe
Received one yesterday (3/12) set it up today. Interesting little press. Had some "confusion" with all the little plastic parts that came with it and even as simple as it turned out to be, Lee's instructions were little help, although they are very nicely done with all the pictures (that show little detail, may as well just look at the picture on the box) . But I do have to admit I'm not the best with instructions. I am assuming the two little tiny "extra" red things are for the bullet feeder(?) sizer setup, maybe, . I have no plans to use this for sizing bullets though. I did install the universal 4 tube system on it without to much difficulty but the press being so small it doesn't give you a lot of room to work in. I'm cleaning a bunch of 45acp brass right now and tomorrow will run them through the machine using a universal decapping die and see how that goes. If all goes well, and I have no reason to believe it won't, I may just get rid of my Load Master press as I really won't need it any longer. Brass prep was the main reason I bought the LM but I have used it quite a bit reloading 9mm and 45 acp but will change over to a different press for that also. I like the looks of this little press, very innovative and I think it will fit my needs nicely.
It sure doesn't take up much room.....
It sure doesn't take up much room.....
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: I'm All In ~ App Press Deluxe
Any body tried bullet sizing yet? I found a bunch of my 385 grain 40/65 bullets unsized and not lubed. So I pan lubed them today with homemade Emmerts. I've got a bench plate on the way so when it gets here I'm going to set up to size bullets. Wondering if anyone has tried it with the auto feed.
Be well, stay safe, make smoke,
Be well, stay safe, make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: I'm All In ~ App Press Deluxe
It will be interesting to see how they feed through the tube with the lube. I didn't have any trouble with the bullet feeders on the Load-Master as long as the bullets were dusted with mica. I bought an lb jug of it years ago; a little goes a long way. I also tried graphite as I use it with my no-till seeder. Mixed with the seeds, it prevents the seed meters from overheating. That was a mistake, it turns everything black, and it is almost impossible to remove.Ohio3Wheels wrote:Any body tried bullet sizing yet? I found a bunch of my 385 grain 40/65 bullets unsized and not lubed. So I pan lubed them today with homemade Emmerts. I've got a bench plate on the way so when it gets here I'm going to set up to size bullets. Wondering if anyone has tried it with the auto feed.
Michael
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: I'm All In ~ App Press Deluxe
That may be a problem. You're right about mica, I bought a quart size can of it back in the early 70's and still have most of it last I looked. I figure it'll be a learning experience, as they say. Got the USPS notification that the bench plate should be here tomorrow. Thank goodness for on-line merchants and express mail.Ranch Dog wrote:It will be interesting to see how they feed through the tube with the lube. I didn't have any trouble with the bullet feeders on the Load-Master as long as the bullets were dusted with mica. I bought an lb jug of it years ago; a little goes a long way. I also tried graphite as I use it with my no-till seeder. Mixed with the seeds, it prevents the seed meters from overheating. That was a mistake, it turns everything black, and it is almost impossible to remove.Ohio3Wheels wrote:Any body tried bullet sizing yet? I found a bunch of my 385 grain 40/65 bullets unsized and not lubed. So I pan lubed them today with homemade Emmerts. I've got a bench plate on the way so when it gets here I'm going to set up to size bullets. Wondering if anyone has tried it with the auto feed.
Stay well, be safe and make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
- GasGuzzler
- Moderator & Supporter
- Posts: 2046
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 501 times
Re: I'm All In ~ App Press Deluxe
I thought about getting one since they were introduced. Well...someone on the Marlin forum had a new one for sale for $80.00 shipped so I guess I'm getting one.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- buckeye43210
- 250 Shots
- Posts: 253
- Joined: 20 Dec 2014 09:47
- My Press Choice: Progressive
- Location: TPA
- Has thanked: 23 times
- Been thanked: 131 times