Here you go.RBHarter wrote:Can you add a picture of the 30-30 next to the AI ?
I'm envisioning something akin to the 7-30 Waters .
Bored with my Rio Grande 30-30 Win
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Bored with my Rio Grande 30-30 Win
Michael
-
- 250 Shots
- Posts: 305
- Joined: 01 Mar 2016 05:00
- My Press Choice: Single Stage
- Location: ohio
- Has thanked: 108 times
- Been thanked: 94 times
Re: Bored with my Rio Grande 30-30 Win
How much shorter is the 30-30 ai than a normal 30-30?
Or is it just the camera angle that makes it look shorter?
Or is it just the camera angle that makes it look shorter?
- GRV01
- Posts: 92
- Joined: 21 Mar 2017 02:14
- My Press Choice: Hand Press
- Location: Miami FL
- Has thanked: 6 times
- Been thanked: 24 times
Re: Bored with my Rio Grande 30-30 Win
My reading of the wikipedia article is that Ackley's Improved cartidges kept the COAL but simply changed the angle of the shoulder to increase internal case capacityklr wrote:How much shorter is the 30-30 ai than a normal 30-30?
Or is it just the camera angle that makes it look shorter?
No thin chicks
Currently reloading .357 Magnum and .38 Special
Currently reloading .357 Magnum and .38 Special
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Bored with my Rio Grande 30-30 Win
Good observation klr and GRV01 is correct.GRV01 wrote:My reading of the wikipedia article is that Ackley's Improved cartidges kept the COAL but simply changed the angle of the shoulder to increase internal case capacityklr wrote:How much shorter is the 30-30 ai than a normal 30-30?
Or is it just the camera angle that makes it look shorter?
Anytime you fireform something, you loose OAL. As the brass flows to the new greater diameter, it must come from somewhere, thank goodness it's from the length and not thickness. Starting with a 2.039' cartridge, the fireforming reduced them to an average of 2.039' 2.011". I hear and see it written by some that you never need to trim the 30-30 AI case. They assume the brass doesn't grow with but they must be sitting there with a case length gauge vs. actually measuring the case. Sure it will "grow", just like any other case. I might choose not to let it grow as I will be shooting loads at the SAAMI limit. Neck tension using the 2.039" case vs. the 2.011" it fireformed at will create 1.5K more PSI in the chamber.
My 35-30 took a 2.039" cartridge to 2.000" and the 303 British will make a similar reduction because of the differences in the SAAMI/CIP chamber dimensions vs. the SAAMI/CIP case dimensions.
I got increments of BL-C(2) loaded, so should be able to shoot it today. I will also work with H322, H4895, and LVR.
Last edited by Ranch Dog on 14 Sep 2018 06:41, edited 2 times in total.
Reason: corrected the fire-formed length
Reason: corrected the fire-formed length
Michael
- RBHarter
- Founding Member
- Posts: 2046
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Bored with my Rio Grande 30-30 Win
Looks a little bit like a 30 Rem .
That is exactly what I was thinking it would look like actually although I had expected the shoulder to move a little farther forward and sacrifice a little bit more neck .
I would think you could get the neck length back if you used 32 WS as a parent for the AI . Plus getting a true shoulder to form against ........ I know rims and belts don't HS on the shoulder ..... whatever .
That is exactly what I was thinking it would look like actually although I had expected the shoulder to move a little farther forward and sacrifice a little bit more neck .
I would think you could get the neck length back if you used 32 WS as a parent for the AI . Plus getting a true shoulder to form against ........ I know rims and belts don't HS on the shoulder ..... whatever .
Just a Red neck,White boy, Blue blood American.....
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Bored with my Rio Grande 30-30 Win
That is a pretty good idea RB, and I actually have 32 Win Spl brass to try it with. I will take a look at it.RBHarter wrote:I would think you could get the neck length back if you used 32 WS as a parent for the AI . Plus getting a true shoulder to form against.
Michael
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: Bored with my Rio Grande 30-30 Win
Check it out RB. Got a double shoulder with the step down from .32 to .308. It will chamber, but will not be able to measure the length until it is fireformed.Ranch Dog wrote:That is a pretty good idea RB, and I actually have 32 Win Spl brass to try it with. I will take a look at it.RBHarter wrote:I would think you could get the neck length back if you used 32 WS as a parent for the AI . Plus getting a true shoulder to form against.
Michael
- Dan 444
- Posts: 112
- Joined: 30 Jun 2013 09:19
- My Press Choice: Single Stage
- Location: Northern Adirondack Mountains of NY
- Has thanked: 8 times
- Been thanked: 31 times
Re: Bored with my Rio Grande 30-30 Win
I'm impressed, Michael. I bet that your load development is gonna result in very good accuracy!
Dan
Dan
- RBHarter
- Founding Member
- Posts: 2046
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: Bored with my Rio Grande 30-30 Win
I have this worn x39 that the rim to shoulder gets shorter every cycle and about every 5th cycle I have to neck it up to 358 and back down to 314 to keep the primer in the case .Ranch Dog wrote:Check it out RB. Got a double shoulder with the step down from .32 to .308. It will chamber, but will not be able to measure the length until it is fireformed.Ranch Dog wrote:That is a pretty good idea RB, and I actually have 32 Win Spl brass to try it with. I will take a look at it.RBHarter wrote:I would think you could get the neck length back if you used 32 WS as a parent for the AI . Plus getting a true shoulder to form against.
For those that may have missed the madness of the thought process . When you neck a small cartridge up , depending on the amount , you get thinner necks and a break even on length because anything gained from the shoulder to mouth is lost in dia . When you neck down the neck will always get longer and sometimes thicker . Where a case loses length to a shoulder move , at least to me , it makes sense to neck down to blow out . I'm part because as you can see in the picture part of the larger neck is already filling the shoulder expansion space .
The head stamps will be completely wrong but I don't think you could get the breach closed on either case in either parent chamber .
Just a Red neck,White boy, Blue blood American.....