Zip I have been shooting the Lee TL 90 grain in my Moslin Nagant rifles as well as my SKS. They are fun to shoot they don't chamber well so I have to help them in. I loaded some in 30-30 cases sized to .311 they chamber and cycle we'll in my model 94. But I have not got out to try them yet.
daboone, I put a cast bullet between the main spring and frame it lightened the single action and made the double action doable. You can adjust the bullet by smashing it with a hammer a little at a time. I can help you with reloads for your Nagant if you want. Let me know if you are using 32-20 cases or 7.62x38R cases. The Lee M95 dies load 32-20 brass as is. I was able to load real Nagant brass with the Lee Nagant die set. I ordered parts for the dies from Lee to make it a lot easier should be here tomorrow. I all so modded a M1 Carbine Lee Loader to load Nagant brass it works real good
Lee 90gr SWC .314 TL Mold
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: Lee 90gr SWC .314 TL Mold
Thank you for this response. Now I'll boldly ask for another
I'm not visualising the bullet ..... frame for the trigger pull. Any chance of a photo?
I'm not visualising the bullet ..... frame for the trigger pull. Any chance of a photo?
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
- Ranch Dog
- Site Admin
- Posts: 6457
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2850 times
- daboone
- Founding Member
- Posts: 1397
- Joined: 30 Nov 2013 21:47
- My Press Choice: Single Stage
- Location: AZ, TX, HI
- Has thanked: 677 times
- Been thanked: 787 times
Re: Lee 90gr SWC .314 TL Mold
Wow that's a simple improvement. Thank You for posting this picture! I'm heading to the bench to make this happen. :-)
An ignorant person is one who doesn't know what you have just found out.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
When setting a job up for myself it must be Idiot Proof as well, as I am a bigger idiot than most people I know, and I prove it to myself everyday.
-
- Founding Member
- Posts: 65
- Joined: 27 Aug 2013 00:00
- My Press Choice: Hand Press
- Location: United States
- Has thanked: 3 times
- Been thanked: 16 times
Re: Lee 90gr SWC .314 TL Mold
Some guys use a nut I could not find one the right size. The bullet worked good for me because I could adjust it to just the right size. Hope it works well for you.