titegroup for 380
-
- Posts: 8
- Joined: 07 Jul 2016 09:55
- My Press Choice: Turret
- Location: maine
- Has thanked: 1 time
- Been thanked: 1 time
titegroup for 380
Is anyone using Titegroup to load 380? I can find loads for 9mm and 45 acp. I'm using a 90 grain plated bullet from Berry's.
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: titegroup for 380
"Load Data" has a few loads listed for 90 gr cast with Titegroup. They are from the Lyman 49th edition.
A lot of the listed loads both cast and jacket only show 0.3 gr min to max - kind of a tight coffin corner unless you weigh for really really trust you measure .
Make smoke,
A lot of the listed loads both cast and jacket only show 0.3 gr min to max - kind of a tight coffin corner unless you weigh for really really trust you measure .
Make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: titegroup for 380
Yes RD gave me a recipes last year but that was for a lead bullet of 95 grains.
Je suis Charlie
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: titegroup for 380
This will give you an idea> http://www.lee-loader.com/viewtopic.php ... roup#p8285
Je suis Charlie