Titan's Bullet/Case Feeder Tube Harness!
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2850 times
Titan's Bullet/Case Feeder Tube Harness!
Titan has a new product that helps to stabilize the bullet and case feeder tubes, a must have for the Load-Master as far as I'm concerned. If you have ever been frustrated with trying to install or revmove the case collator and the tubes from the multi tube base this is a must have. How about the full bullet tubes just slapping against each other? You need to check out the TITAN TUBE HARNESS.
This has been bugging me for a long time and a simple email to Titan with the suggestion and boom! I've ordered a number of them!
This has been bugging me for a long time and a simple email to Titan with the suggestion and boom! I've ordered a number of them!
Michael
- Fyodor
- Founding Member & Supporter
- Posts: 1512
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: Titan's Bullet/Case Feeder Tube Harness!
Nice idea, since I have to fiddle these tubes in and out every time I swap caliber, I know how annoying this can be. I think I'm going to order a few, too!
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Titan's Bullet/Case Feeder Tube Harness!
Saw that to night when looking for something else. Pretty cool but don't think it works on my Turret Press.
Je suis Charlie
- Fyodor
- Founding Member & Supporter
- Posts: 1512
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: Titan's Bullet/Case Feeder Tube Harness!
Oh, maybe you can bolt on some of these tubes somewhere...
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
-
- Founding Member
- Posts: 1617
- Joined: 17 Oct 2013 18:09
- My Press Choice: Turret
- Location: West Virginia
- Has thanked: 1017 times
- Been thanked: 323 times
Re: Titan's Bullet/Case Feeder Tube Harness!
Fyodor wrote:Oh, maybe you can bolt on some of these tubes somewhere...
A bullet feeder for my turret would be awesome even if it needed to be done manually.
Je suis Charlie
-
- 250 Shots
- Posts: 279
- Joined: 18 Nov 2015 08:59
- My Press Choice: Progressive
- Location: Jefferson, GA
- Has thanked: 91 times
- Been thanked: 85 times
Re: Titan's Bullet/Case Feeder Tube Harness!
How does this work vs. a bundle tie I've seen on some youtube videos? What advantages over the bundle tie? I looked at those and almost bought one, but decided against impulse buying until I researched them better.
-
- Posts: 25
- Joined: 16 Nov 2014 15:58
- My Press Choice: Progressive
- Location: Chicago suburbs
- Has thanked: 2 times
- Been thanked: 9 times
Re: Titan's Bullet/Case Feeder Tube Harness!
I assume when you say bundle tie that you are referring to a nylon zip tie. The difference with the tube harness from Titan is that it spaces the tubes to be easily inserted into the collator. A zip tie would cinch all the tubes together and it would be a bear to get the 4 tube s into the space holes in the collator.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2850 times
Re: Titan's Bullet/Case Feeder Tube Harness!
Neatest thing since sliced bread. I use two on the tubes; one high & one low. It really stiffens & stabilizes the tubes whether it be the bullet or case feeder.Rmelchiori wrote:I assume when you say bundle tie that you are referring to a nylon zip tie. The difference with the tube harness from Titan is that it spaces the tubes to be easily inserted into the collator. A zip tie would cinch all the tubes together and it would be a bear to get the 4 tube s into the space holes in the collator.
Michael
- Fyodor
- Founding Member & Supporter
- Posts: 1512
- Joined: 04 Jan 2014 05:45
- My Press Choice: Progressive
- Location: Gernsbach, Germany
- Has thanked: 794 times
- Been thanked: 504 times
Re: Titan's Bullet/Case Feeder Tube Harness!
I do as RD, two on each four pack of tubes. I only have one press, but one carrier for every caliber, so I have to swap the tubes regularly. The spacers make that much easier. And it makes the column a lot sturdier.
"I disapprove of what you say, but I will defend to the death your right to say it"
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.
- Evelyn Beatrice Hall, often misattributed to Voltaire
I think I'm thinking, therefore I may possibly be.