Page 1 of 1

Titan's Bullet/Case Feeder Tube Harness!

Posted: 12 Apr 2015 09:14
by Ranch Dog
Titan has a new product that helps to stabilize the bullet and case feeder tubes, a must have for the Load-Master as far as I'm concerned. If you have ever been frustrated with trying to install or revmove the case collator and the tubes from the multi tube base this is a must have. How about the full bullet tubes just slapping against each other? You need to check out the TITAN TUBE HARNESS.

Image

Image

Image

This has been bugging me for a long time and a simple email to Titan with the suggestion and boom! I've ordered a number of them!

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 13 Apr 2015 00:05
by Fyodor
Nice idea, since I have to fiddle these tubes in and out every time I swap caliber, I know how annoying this can be. I think I'm going to order a few, too!

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 14 Apr 2015 20:47
by 62chevy
Saw that to night when looking for something else. Pretty cool but don't think it works on my Turret Press. :D

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 14 Apr 2015 23:19
by Fyodor
Oh, maybe you can bolt on some of these tubes somewhere... :D

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 15 Apr 2015 09:23
by 62chevy
Fyodor wrote:Oh, maybe you can bolt on some of these tubes somewhere... :D

A bullet feeder for my turret would be awesome even if it needed to be done manually.

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 21 Nov 2015 21:11
by DaveInGA
How does this work vs. a bundle tie I've seen on some youtube videos? What advantages over the bundle tie? I looked at those and almost bought one, but decided against impulse buying until I researched them better.

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 21 Nov 2015 23:42
by Rmelchiori
I assume when you say bundle tie that you are referring to a nylon zip tie. The difference with the tube harness from Titan is that it spaces the tubes to be easily inserted into the collator. A zip tie would cinch all the tubes together and it would be a bear to get the 4 tube s into the space holes in the collator.

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 22 Nov 2015 05:45
by Ranch Dog
Rmelchiori wrote:I assume when you say bundle tie that you are referring to a nylon zip tie. The difference with the tube harness from Titan is that it spaces the tubes to be easily inserted into the collator. A zip tie would cinch all the tubes together and it would be a bear to get the 4 tube s into the space holes in the collator.
Neatest thing since sliced bread. I use two on the tubes; one high & one low. It really stiffens & stabilizes the tubes whether it be the bullet or case feeder.

Re: Titan's Bullet/Case Feeder Tube Harness!

Posted: 22 Nov 2015 12:18
by Fyodor
I do as RD, two on each four pack of tubes. I only have one press, but one carrier for every caliber, so I have to swap the tubes regularly. The spacers make that much easier. And it makes the column a lot sturdier.