Anyone use BL-C2 for .223/556
-
- Supporter
- Posts: 137
- Joined: 21 Apr 2020 13:32
- My Press Choice: Progressive
- Location: KY
- Has thanked: 6 times
- Been thanked: 7 times
Anyone use BL-C2 for .223/556
Just looking for another powder to try with my AR's. I have a couple bottles of CFE223. I saw the BLC2 recommended highly on another forum. Are there any reasons to not use BLC2? If so what would you use instead? With the way things are (looks like another wave of panic buying due to the riots) I am trying to get an order in today or tomorrow.
-
- Supporter
- Posts: 258
- Joined: 15 May 2018 16:37
- My Press Choice: Single Stage
- Location: Oregon
- Has thanked: 94 times
- Been thanked: 74 times
Re: Anyone use BL-C2 for .223/556
Have Ya looked in any Up to Date Legit. Loading Manuals? Some of that Innernet Load Data Blows up Guns...
Good Luck!
I Understand thou...I'm tryin to find Cast Data for the 7.7 jap....Not much found so far
Good Luck!
I Understand thou...I'm tryin to find Cast Data for the 7.7 jap....Not much found so far
-
- Supporter
- Posts: 888
- Joined: 06 Mar 2016 16:09
- My Press Choice: Hand Press
- Location: SW Ohio
- Has thanked: 156 times
- Been thanked: 240 times
Re: Anyone use BL-C2 for .223/556
BL-C(2) is one of the many powders I've never used. No particular reason, just never got around to it. That aside looking a Load Data searches Hodgdon list loads for anything from 35 grain bullets at least 60 grains.
Stay well, be safe, make smoke,
Stay well, be safe, make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time
- Macd
- Supporter
- Posts: 1009
- Joined: 16 Oct 2017 16:12
- My Press Choice: Single Stage
- Location: Far East
- Has thanked: 362 times
- Been thanked: 403 times
Re: Anyone use BL-C2 for .223/556
Ohio3Wheels wrote:BL-C(2) is one of the many powders I've never used. No particular reason, just never got around to it. That aside looking a Load Data searches Hodgdon list loads for anything from 35 grain bullets at least 60 grains.
Stay well, be safe, make smoke,
It is in the right range for the.223 Rem. Lots of published load data. Seems very close to H335 which was/is the powder used for many military 5.56 applications.
Interesting article on this powder.
http://www.thegunmag.com/bl-c-powder-one-couldnt/
-
- Supporter
- Posts: 137
- Joined: 21 Apr 2020 13:32
- My Press Choice: Progressive
- Location: KY
- Has thanked: 6 times
- Been thanked: 7 times
Re: Anyone use BL-C2 for .223/556
Thanks guys. Especially for that H335 reference. I did not know what powder they used in military ammo.
-
- 250 Shots
- Posts: 255
- Joined: 03 Jan 2017 10:58
- My Press Choice: Turret
- Location: Utah
- Has thanked: 56 times
- Been thanked: 85 times
Re: Anyone use BL-C2 for .223/556
I use BL-C(2) almost exclusively for my 5.56 M193 rounds. I use it with a 55gr fmj Berry's with a CCI 450. I developed a load that matches the Federal Black Eagle M193 load with matching POA and POI with the same felt recoil. I have not yet tested it over the chrony though. Meters very well through my RCBS Uniflow.
- GasGuzzler
- Moderator & Supporter
- Posts: 2035
- Joined: 26 Jan 2016 22:39
- My Press Choice: Turret
- Location: Cooke County, TX
- Has thanked: 330 times
- Been thanked: 500 times
Re: Anyone use BL-C2 for .223/556
Do you have an example? With as varying as manuals are, there are real people on the internet I trust more.orerancher wrote:Some of that Innernet Load Data Blows up Guns...
I use CFE223 and H335 for 5.56X45. I don't load .223REM technically.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
I've always been crazy but it's kept me from goin' insane.
- RBHarter
- Founding Member
- Posts: 2040
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 670 times
Re: Anyone use BL-C2 for .223/556
What books do you have for the 7.7 ?
I have some older Hornady , Herters , and Ackley Handbooks if you'd like .
I have some older Hornady , Herters , and Ackley Handbooks if you'd like .
Just a Red neck,White boy, Blue blood American.....
-
- Posts: 31
- Joined: 01 Jun 2017 12:09
- My Press Choice: Turret
- Location: New Jersey
- Has thanked: 1 time
- Been thanked: 9 times
Re: Anyone use BL-C2 for .223/556
I've used bl-c2. It meters well and my wife and daughter were very happy with this powder vs varget and h335. They both liked recoil and accuracy.
-
- Supporter
- Posts: 994
- Joined: 09 Nov 2015 06:35
- My Press Choice: Single Stage
- Location: Washington State
- Has thanked: 37 times
- Been thanked: 274 times
Re: Anyone use BL-C2 for .223/556
I have a couple pounds of it and have used it sparingly for my AR. Didn't really get into really testing it but it seemed to work as well as others I have. Mostly I use H335 because I have more of it and have had good luck with it. I also have CFE223 and use it as well. That's about all I've used for my 223/556 loadings. The only difference I noticed between the three was BLC2 loads had a different "sound" and dropped the cases much closer, like right on the bench closer. I was not at a max load, but neither with the others either. IMO between the three, flip a coin, they'll all three work just fine. I should add a caveat, (Paul Harrell, my hero) my abilities with my AR are no where near the Commandos on other forums. I do not shoot 1/4 inch groups at 100 like most "snipers" seem to be able to do at will with their's.