Question about 9mm Lee Factory Crimp die

Discussions covering the components and techniques of reloading for your handgun.
scott511
Posts: 15
Joined: 05 Dec 2020 01:58
My Press Choice: Turret
Location: MS
Has thanked: 7 times
Been thanked: 1 time

Re: Question about 9mm Lee Factory Crimp die

Post by scott511 »

larryw wrote:From all your answers & info so far, all things being equal?? I would say, if they fit & spec, I wouldn't worry about it. Like I said, all it looks like is the FCD is doing what it's supposed to do.
Thanks Larry, and everyone else that replied.
As SWBuckeye said, his flare is .003-.005
Mine was .010-.012
I will try to back off of that a bit and try some more.
I will point out that those rounds fed and fired fine, so I'll run more with less flare and see if it changes.
SWBuckeye
Posts: 25
Joined: 23 Dec 2020 11:46
My Press Choice: Progressive
Location: Ohio
Has thanked: 4 times
Been thanked: 7 times

Re: Question about 9mm Lee Factory Crimp die

Post by SWBuckeye »

Glad to help out a fellow low life Lee lover.

SWBuckeye
Locked

Return to “Handgun Reloading”