.357 confusing data

Discussions covering the components and techniques of reloading for your handgun.
Mr. Don
Supporter
Supporter
Posts: 53
Joined: 30 Sep 2017 16:49
My Press Choice: Turret
Location: maine
Has thanked: 30 times
Been thanked: 13 times

.357 confusing data

Post by Mr. Don »

Went to a local gun shop this AM and picked up some Hornady 158 grain XTP's. Looking up some load data and I see why sometimes the world of reloading seems so confusing. :) H110 powder:

Hodgdon on-line - 15 - 16.7
Hornady #9 - 12.7 - 15.6 (W296 12.4 - 16.00??)
Lyman #49 - 16.3 - 17

The book "Reloading for Handgunners" (Patrick Sweeney 2011)includes a warning that H110 does not take well to reduced loads and to not load below the Hodgdon recommended 15 grain minimum. :) And I thought H110/W295 were identical?

Makes me go huh?
"I'm a wed-hot sportsman after wild game." E. Fudd
User avatar
RBHarter
Founding Member
Founding Member
Posts: 2040
Joined: 13 Mar 2014 19:45
My Press Choice: Single Stage
Location: The green hell 90 miles north of Texarka
Has thanked: 76 times
Been thanked: 670 times

Re: .357 confusing data

Post by RBHarter »

You probably already know this but ........
Case , primer , powder lot , brass lot , local humidity , sizing and 25 other seemingly tiny factors that added together make giant differences .

I have 2-7 references for every cartridge I load . When it's new ground I average the start and end with the lowest max load . In this case I'd definitely get 2 more references as the start loads look like they would be pretty close to the lowest max .

I've been seeing a lot of this sort of discrepancy questioned all over of late ........
Just a Red neck,White boy, Blue blood American.....
User avatar
GasGuzzler
Moderator & Supporter
Moderator & Supporter
Posts: 2035
Joined: 26 Jan 2016 22:39
My Press Choice: Turret
Location: Cooke County, TX
Has thanked: 330 times
Been thanked: 500 times

Re: .357 confusing data

Post by GasGuzzler »

It's getting worse by the year IMO. In this case I'd start at the bullet manufacturer's load. I bet 13.0 is too little though.
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
User avatar
Macd
Supporter
Supporter
Posts: 1009
Joined: 16 Oct 2017 16:12
My Press Choice: Single Stage
Location: Far East
Has thanked: 362 times
Been thanked: 403 times

Re: .357 confusing data

Post by Macd »

GasGuzzler wrote:It's getting worse by the year IMO.
That is the truth :cry:

Having that much swing in a handgun powder is a bit scary. When I first started loading for pistol (9mm) and saw the small difference between start and maximum I broke out into a cold sweat. I was using the Lee scale and I never felt comfortable that I was reading it correctly. It was the primary reason I bought an electronic scale. Even then I stuck to start loads for a long time. Sometime I will share my experience duplicating the 38 special 200 grain "Police" load with L'il Gun. Glad I have a Blackhawk ;)
User avatar
farmerjim
Supporter
Supporter
Posts: 315
Joined: 29 Jan 2015 14:27
My Press Choice: Turret
Location: Saint Francisville LA
Has thanked: 20 times
Been thanked: 114 times

Re: .357 confusing data

Post by farmerjim »

I get the same thing for herco. Max loads will vary by as much as 3 grains. I just use past experience with the powder to get my starting loads.
fullagofast
Posts: 15
Joined: 27 Dec 2014 11:43
My Press Choice: Turret
Location: tn
Has thanked: 7 times
Been thanked: 7 times

Re: .357 confusing data

Post by fullagofast »

Honestly, consistent H110 data is like finding unicorns...

"Conventional wisdom" says "Don't download H110! <Insert horrible catastrophic result here> will happen!"
In Mr. Don's example - 16.3, 15, or 12.7 grains don't reduce.

300 Blackout is a similar sized case (not exact but you get the idea) and Hodgdon's site shows a MAX load of 9.2 grains for a 220 grain bullet. I thought <Insert horrible catastrophic result here> would happen!
cj8281
250 Shots
250 Shots
Posts: 255
Joined: 03 Jan 2017 10:58
My Press Choice: Turret
Location: Utah
Has thanked: 56 times
Been thanked: 85 times

Re: .357 confusing data

Post by cj8281 »

I think a lot of it has to do with the "new" electronic measuring system and psi. Looking at another bullet, the Speer 158. The older, cup measured loads were much heavier.
Speer #12, #13 158gr H110 S. 13.9gr Max 15.5gr psi 35,000
Speer #10, #11 158gr H110 S. 15.8gr Max 17.8gr cup 46,000

38 spl
Speer #10, #11 158gr H110 max 9.6gr cup 18,900
38 spl +P
Speer #10, #11 158gr H110 max 10.8gr cup 22,400
Don't get me started on Blue Dot.
cj8281
250 Shots
250 Shots
Posts: 255
Joined: 03 Jan 2017 10:58
My Press Choice: Turret
Location: Utah
Has thanked: 56 times
Been thanked: 85 times

Re: .357 confusing data

Post by cj8281 »

On the 300 blackout, with the 150 grain bullet, the H110 max load is 17.2 grains.
Ohio3Wheels
Supporter
Supporter
Posts: 888
Joined: 06 Mar 2016 16:09
My Press Choice: Hand Press
Location: SW Ohio
Has thanked: 156 times
Been thanked: 240 times

Re: .357 confusing data

Post by Ohio3Wheels »

fullagofast wrote:Honestly, consistent H110 data is like finding unicorns...

"Conventional wisdom" says "Don't download H110! <Insert horrible catastrophic result here> will happen!"
In Mr. Don's example - 16.3, 15, or 12.7 grains don't reduce.

300 Blackout is a similar sized case (not exact but you get the idea) and Hodgdon's site shows a MAX load of 9.2 grains for a 220 grain bullet. I thought <Insert horrible catastrophic result here> would happen!
There is considerably more at play than case capacity. In all the years and all the pounds of H110 I've gone through I've always paid heed to the warning about reduced loads. On the other hand I never found minimum loads to be very accurate. The worse case I've ever personally heard of with a reduced load was a stuck bullet in a Super Blackhawk. All powders have their quirks and if you're going to use them you need to respect their quirks.

I start with the bullet maker's recommendations then move to the powder maker's. Unfortunately bullet builders can't test all the possible powders and powder folks can't test all the possible bullets, though I suspect both test more than they publish. You wind up with the best combinations that they are willing to publish. So far going on 52 years of this adventure it's worked for me. YMMV.

Make smoke,
Curt.......makin' smoke and raising my carbon foot print one cartridge at a time +guns +guns
lrrice
Posts: 13
Joined: 11 Mar 2018 09:03
My Press Choice: Progressive
Location: New Mexico
Has thanked: 9 times
Been thanked: 3 times

Re: .357 confusing data

Post by lrrice »

On powders that have down loading issues, I would start at or slightly above the powder manufacturers recommendation. They are dealing exclusively with their powder and have most likely tested it with a large variety of bullets under a large variety of conditions.
Post Reply

Return to “Handgun Reloading”