Hello from Virginia Beach

[TomSp8]

Just the obligatory "hello". Reloading for about 12 years (Mostly pistol) using a Classic Cast 4 hole turret press. And preparing to take the dive into casting and powder coating.

Tom Speight

[Macd]

Welcome. A lot of us both cast and PC so you will find helpful hints here.

[RBHarter]

Don't do it run , run away !!!!

It's not as bad as all that , 20 short years I only have maybe 55-60 moulds .

I've had 8-9 other moulds and the 358-158RF for 38/357 is the one I shoot most .

I've had 4 other moulds for 40 S&W and the 401-175 gives up nothing .

I have and shot a bunch of the 452-255 RF it's been edged by the NOE version of the 454424 for the Ruger 45 Colts . Unfortunately the Auto Rim/ACP 1917 doesn't like either of them the one refitted for 45 S&W shoots the NOE bullet well enough though . Weird as only the chamber depth was changed .

Both 45s also work well in a High Point ACP carbine and M92' carbines . The 358-158 also delivered more than I could ask in a Marlin 1894C 38/357 .

Welcome to the forum .

[Ranch Dog]

Welcome to the forum!!!