AD with CFE Pistol

[SWBuckeye]

Mine did the same thing when I first got it. With 9mm it would not rotate to full dump. I made a spacer for it to get full rotation. When I get a chance, hopefully in the next couple of days,I will dissamble it and take pics and measurements for you.

https://photos.app.goo.gl/RvKTsptPJu71w8qS8

Spacer is .440" dia. by .150" thick inside dia. is same as the tube from the AD. It slides inside the expander and floats freely in the bore. AD extention tube holds it in place. Hope this helps.

SWBuckeye

[GasGuzzler]

I had problems with mine and how to set it up for full rotation without crushing cases on the LCT way back when I first got it. With time I will find the link to my topic in the event it helps your set up.

[killian6pk]

Mine did the same thing when I first got it. With 9mm it would not rotate to full dump. I made a spacer for it to get full rotation. When I get a chance, hopefully in the next couple of days,I will dissamble it and take pics and measurements for you.

https://photos.app.goo.gl/RvKTsptPJu71w8qS8

Spacer is .440" dia. by .150" thick inside dia. is same as the tube from the AD. It slides inside the expander and floats freely in the bore. AD extention tube holds it in place. Hope this helps.

SWBuckeye

Thanks for the idea. I don't believe I would ever have thought of that. Now I see it makes sense. I think I have my problem figured out. I had to screw the powder thru die all the way in. The top of the lock ring is actually above the last thread on the die. I hesitated to do that because I had the flare just like I wanted it on the case and did not want to over flare the case. But that turned out not to be a problem. The flare is just fine even with the die screwed in that much. Now the AD makes full rotation.

[killian6pk]

I had problems with mine and how to set it up for full rotation without crushing cases on the LCT way back when I first got it. With time I will find the link to my topic in the event it helps your set up.

Thanks see my reply above. I think I got it fixed. Now on to other problems.

[SWBuckeye]

Glad to hear you got it to work properly. Now you will see just how consistent the AD is.

SWBuckeye