Factory Crimp Dies

50 BMG, Collet, and steel reloading dies plus the Factory Crimp Dies. Also, discussions concerning the Deluxe, Pacesetter, and RGB die sets.

Factory Crimp Dies

Postby orerancher » 04 Sep 2019 12

Lee does not make a Factory Crimp die for the .35 Whelen...
Case is longer, Shoulder Angle is different...But...Could a Crimp Die for the .358win be adjusted to work??
orerancher
Supporter
Supporter
 
Posts: 222
Joined: 15 May 2018
Has thanked: 67 times
Been thanked: 64 times
My Press Choice: Single Stage
Location: Oregon

Re: Factory Crimp Dies

Postby RBHarter » 04 Sep 2019 15

With about a half inch of washers .
I think a proper spacer could be made for one also . There should only be the crimp points touching the case and a short contact on the neck as a balance point . The neck is longer but the shoulders are close to the same diameter . You would need a spacer equal in length to the difference in case length give or take for actual case length .

It's a low volume item , but , a 350 Remington mag might be available seems like it was the same as the Win Mags at 2.55 case length so you'd have to lap .06 off the base but then there's no parts to lose .

Also a 9×57 might be available and would only need about .25 for spacers . 35s are hard there's only a few .
Just a Red neck,White boy, Blue blood American.....
User avatar
RBHarter
Founding Member
Founding Member
 
Posts: 1533
Joined: 13 Mar 2014
Has thanked: 70 times
Been thanked: 532 times
My Press Choice: Single Stage
Location: The green hell 90 miles north of Texarka

Re: Factory Crimp Dies

Postby Ranch Dog » 04 Sep 2019 15

Michael
Image
User avatar
Ranch Dog
Site Admin
Site Admin
 
Posts: 5528
Joined: 22 Jun 2013
Has thanked: 1231 times
Been thanked: 2517 times
My Press Choice: Progressive
Location: Cuero, TX

Re: Factory Crimp Dies

Postby GasGuzzler » 04 Sep 2019 20

wow
__________________________________________________________________________________________
I've always been crazy but it's kept me from goin' insane.
User avatar
GasGuzzler
Supporter
Supporter
 
Posts: 1416
Joined: 26 Jan 2016
Has thanked: 198 times
Been thanked: 318 times
My Press Choice: Turret
Location: Cooke County, TX

Re: Factory Crimp Dies

Postby orerancher » 05 Sep 2019 10




See...This is why I like this Place!!
I looked in the Lee Catalog and on the Web Site and could not find one...
Thank You!!

Now...Ya got One for .338-06? :D
orerancher
Supporter
Supporter
 
Posts: 222
Joined: 15 May 2018
Has thanked: 67 times
Been thanked: 64 times
My Press Choice: Single Stage
Location: Oregon

Re: Factory Crimp Dies

Postby alphalimafoxtrot » 24 Oct 2019 05

Wow, they even have one for .32 Remington.

Lee is awesome!

Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
User avatar
alphalimafoxtrot
Supporter
Supporter
 
Posts: 153
Joined: 14 Feb 2016
Has thanked: 444 times
Been thanked: 76 times
My Press Choice: Lee Loader
Location: Alexandria, Virginia

Re: Factory Crimp Dies

Postby oscarflytyer » 24 Oct 2019 21

they have some 43 Spanish stuff even!
oscarflytyer
 
Posts: 206
Joined: 17 Mar 2014
Has thanked: 8 times
Been thanked: 71 times
My Press Choice: Single Stage
Location: N AL


Return to Rifle

Who is online

Users browsing this forum: No registered users and 3 guests

  • Advertisement
cron