I had a slight problem with the brass being pushed over on the feed ramp, as it was being pushed from the feed tube to the plate. John Lee at Lee Precision suggested lightly sanding the surface of the plastic to give the brass a little more friction.
This worked well.
Auto Breech Lock Pro: Mod for better brass feeding
-
- Posts: 24
- Joined: 28 Aug 2018 22:29
- My Press Choice: Progressive
- Location: WI
- Been thanked: 9 times
Auto Breech Lock Pro: Mod for better brass feeding
You do not have the required permissions to view the files attached to this post.
- Ranch Dog
- Site Admin
- Posts: 6457
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2850 times
Re: Auto Breech Lock Pro: Mod for better brass feeding
Thanks for the report.
The light sanding works as well on the Load-Master's ramp and with the Bullet Feeder's Action Rod.
The light sanding works as well on the Load-Master's ramp and with the Bullet Feeder's Action Rod.
Michael