This is a always present reminder to me not to go back to priming on press.
On the Loadmaster primers were the main cause of crashes, pulling bullets, rework, and mistakes. Not for me anymore, I won't go back to priming on press, any press.
My Reminder On Priming
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
My Reminder On Priming
You do not have the required permissions to view the files attached to this post.
- RBHarter
- Founding Member
- Posts: 2047
- Joined: 13 Mar 2014 19:45
- My Press Choice: Single Stage
- Location: The green hell 90 miles north of Texarka
- Has thanked: 76 times
- Been thanked: 672 times
Re: My Reminder On Priming
Good reminder.
I think there are factory fixes for the priming bugs now .
I think there are factory fixes for the priming bugs now .
Just a Red neck,White boy, Blue blood American.....
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: My Reminder On Priming
My procedure for loading works so well I would never prime on press. And the Loadmaster puts ammo out so fast I hate to see the loading sessions over so quick. I prime the cases while watching TV so I count that as zero time lost do to the fact I am setting there on my rear regardless.
-
- Posts: 7
- Joined: 16 Dec 2015 11:41
- My Press Choice: Progressive
- Location: OR
Re: My Reminder On Priming
For what it's worth, my Load Master is a little over a year old and I'm not having the problems that you hear of with older presses. I'm assuming that the changes that Lee has introduced to the primer system has resolved many issues. I'm still low time on this press with only about 10k rounds loaded, so perhaps I haven't hit the time on the machine when problems start. Just saying that I'm plugging away and making ammo on my Load Master without all the headaches some talk about.
-
- Founding Member & Supporter
- Posts: 1099
- Joined: 21 Jan 2014 20:57
- My Press Choice: Progressive
- Location: Eastern Iowa
- Has thanked: 182 times
- Been thanked: 357 times
Re: My Reminder On Priming
That's good news, I'm glad they corrected it. I'm so settled in my loading routine and having such good luck I will never go back to priming while loading on any press.piratepast40 wrote:For what it's worth, my Load Master is a little over a year old and I'm not having the problems that you hear of with older presses. I'm assuming that the changes that Lee has introduced to the primer system has resolved many issues. I'm still low time on this press with only about 10k rounds loaded, so perhaps I haven't hit the time on the machine when problems start. Just saying that I'm plugging away and making ammo on my Load Master without all the headaches some talk about.
-
- Posts: 50
- Joined: 26 Nov 2015 04:22
- My Press Choice: Progressive
- Location: Maine
- Been thanked: 6 times
Re: My Reminder On Priming
I'm in the same boat with my LM, no priming issues at all. The couple upside down primers I experienced were caused by my carelessness in fitting the tray onto the primer feed chute. Other than that mines run flawlessly. I purchased my LM new from Titan Reloading back in August '15 and have run several thousand through it now.piratepast40 wrote:For what it's worth, my Load Master is a little over a year old and I'm not having the problems that you hear of with older presses. I'm assuming that the changes that Lee has introduced to the primer system has resolved many issues. I'm still low time on this press with only about 10k rounds loaded, so perhaps I haven't hit the time on the machine when problems start. Just saying that I'm plugging away and making ammo on my Load Master without all the headaches some talk about.
- Ranch Dog
- Site Admin
- Posts: 6458
- Joined: 22 Jun 2013 17:16
- My Press Choice: Progressive
- Location: Inez, TX
- Has thanked: 1617 times
- Been thanked: 2851 times
Re: My Reminder On Priming
Almost makes me want to part mine out on eBay and buy new ones! Will see what the happens once I start in.r1200r wrote:I'm in the same boat with my LM, no priming issues at all. The couple upside down primers I experienced were caused by my carelessness in fitting the tray onto the primer feed chute. Other than that mines run flawlessly. I purchased my LM new from Titan Reloading back in August '15 and have run several thousand through it now.piratepast40 wrote:For what it's worth, my Load Master is a little over a year old and I'm not having the problems that you hear of with older presses. I'm assuming that the changes that Lee has introduced to the primer system has resolved many issues. I'm still low time on this press with only about 10k rounds loaded, so perhaps I haven't hit the time on the machine when problems start. Just saying that I'm plugging away and making ammo on my Load Master without all the headaches some talk about.
Michael
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)